DICE Car Integration Kit for iPod Installation Guide download pdf (Page 13)

Installation

Installation should only be performed by a qualified professional. Beware of sharp edges to avoid injury and exercise

caution when removing trims as they may break. The module should be placed at an accessible location to allow AUX cable

to be connected, such as in the glove box, the center console or under the front seat.

1 Pull vehicle into service bay and access radio/center console.

2 Disconnect both battery terminals. These cables must be disconnected during installation to ensure proper initialization

of the module when it is connected.

3 Before pulling out the radio, removing surrounding trims and screws. Most trims can be removed by carefully pulling on

the piece or using trim removal tools. Trim is usually held in place by snap-in clips.

4 The radio is held in place by a few bolts. To remove these a 10mm socket is usually needed. Consult your dealership if

additional information is needed on removing the radio.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

DICE Car Integration Kit for iPod Installation Guide Page 13